Goonhub
07-18-2015, 04:07 PM
Wifi comp is about packets only. It doesn't intersect with the radio, even with 1459 selected. The only thing I've wanted to make in that fashion was a translator that turned certain words into random words from a list (madlibs or BUTT). To use it as a trigger for a complex machine would be unreliable as speech is rather easily altered in this game to the point where even regex would have a hard time keeping up.
PDA message spoofing.
The packet comes in 2-5 key:value pairs. It looks like this: command=text_message&message=Eggs&sender_name=Manne Love&address_1=0201cdc5&sender=0201ccca -- The pairs are separated by ampersands. Only command=text_message and message=whatevertextyouwant are necessary to send a message, but this send EVERYONE a message under the name !UNKNOWN!. "address_1", which you can get by pinging 1149, is needed if you wanna message someone specific.
The nd cart is the easiest way, but can't be as fancy on it's own. For people who don't know how to use it, just grab a network diagnostic cart and stick it in yer pda, file browse to packet sender and press (add new). Then just add the key value pairs you need.
The most easier form of component spoofing is probably to get a wifi component, a signal check component, a splitter component, a signal builder component, and a spare PDA. I'll skip the basics. How to attach:
Wifi to signal check, signal check to splitter, splitter to signal builder (add+send), signal builder to wifi.
PDA: Swipe it with yer card to make it yours. People forget this.
Wifi: Set freq to 1149 and toggle filtering and forwarding.
Signal Check: Set trigger to your name.
Splitter: Set trigger to message.
Signal Builder: Set starting string to: command=text_message&sender_name=Any name you want&message=
Then you send a pda message to your other PDA. This would then send your message to everyone under the untraceable name "Any name you want". If you want to know how each part works, then just connect it to a sound synth component. It'll show you the connected component is sending.
More advanced methods exist, like pinging the entire pda list into a selection component, or sending a delayed message to everyone who opens the bathroom door OH GOD IT SMELLS IN HERE WHAT DID YOU DO, NAME!? or pinging the entire pda list into a selection component.
Using the pda to set activate stuff involves similar methods. Remote telsci, remote shuttle control, (limited) remote buddy control, blacklisting someone from yer teleporters, letting loose the loaf, etc. You can also use signals from remote signallers (which look something like "command=ACTIVATE&code=30") to do things in a similar fashion. Give the clown a sack full of autohonkers and a remote that controls them all and you have made a friend for life.
Sorry for the disorganized post. Eh.
PDA message spoofing.
The packet comes in 2-5 key:value pairs. It looks like this: command=text_message&message=Eggs&sender_name=Manne Love&address_1=0201cdc5&sender=0201ccca -- The pairs are separated by ampersands. Only command=text_message and message=whatevertextyouwant are necessary to send a message, but this send EVERYONE a message under the name !UNKNOWN!. "address_1", which you can get by pinging 1149, is needed if you wanna message someone specific.
The nd cart is the easiest way, but can't be as fancy on it's own. For people who don't know how to use it, just grab a network diagnostic cart and stick it in yer pda, file browse to packet sender and press (add new). Then just add the key value pairs you need.
The most easier form of component spoofing is probably to get a wifi component, a signal check component, a splitter component, a signal builder component, and a spare PDA. I'll skip the basics. How to attach:
Wifi to signal check, signal check to splitter, splitter to signal builder (add+send), signal builder to wifi.
PDA: Swipe it with yer card to make it yours. People forget this.
Wifi: Set freq to 1149 and toggle filtering and forwarding.
Signal Check: Set trigger to your name.
Splitter: Set trigger to message.
Signal Builder: Set starting string to: command=text_message&sender_name=Any name you want&message=
Then you send a pda message to your other PDA. This would then send your message to everyone under the untraceable name "Any name you want". If you want to know how each part works, then just connect it to a sound synth component. It'll show you the connected component is sending.
More advanced methods exist, like pinging the entire pda list into a selection component, or sending a delayed message to everyone who opens the bathroom door OH GOD IT SMELLS IN HERE WHAT DID YOU DO, NAME!? or pinging the entire pda list into a selection component.
Using the pda to set activate stuff involves similar methods. Remote telsci, remote shuttle control, (limited) remote buddy control, blacklisting someone from yer teleporters, letting loose the loaf, etc. You can also use signals from remote signallers (which look something like "command=ACTIVATE&code=30") to do things in a similar fashion. Give the clown a sack full of autohonkers and a remote that controls them all and you have made a friend for life.
Sorry for the disorganized post. Eh.