Thread Rating:
  • 8 Vote(s) - 3.88 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[MERGED PR] Scaling pipe leakage
#17
(05-22-2022, 04:35 AM)Cal Wrote: [Image: lR2lNtw.png]

This pipeburn has several holes in it, which I circled, and when I first checked it out was at 25mw, rapidly climbed to a whopping 700mw and was still climbing last I checked.

Are they really broken? I don't see that this has caused an issue here.

EDIT: It took 39 holes in the hot loop and 10 in the cold loop for the engine to stop generating power.

Broken is the wrong word for it. The generator itself *works* that isn't really the issue, reaching 700 MW and a bit above should not be much of a problem, (altough it now takes more time and effort), but a bare minimum for a lot of things we want to achieve with the power needs 5000 MW and above which is more of a challenge. We did some experimentation and this is still feasible on Kondaru luckily but on Cog 1 it's a different story.

It's also important to keep the heat and pressure into consideration, even though that usually goes hand in hand with power it's still an individual factor which was affected by the merge. For example, we need around e9 + temperatures in the pipes to sufficiently heat plasma to make the more devastating bombs. 

Also, I want to just clarify, while a big problem with the merge is the fact that it makes some things impossible, what maybe should be considered the most is why this should remain merged. As far as I know I haven't heard anyone openly say that they enjoy this change at all while many others are very against it, even before it was merged I don't see a lot of positive opinions, at least not an obvious majority justifying the change. 

I really just feel like this doesn't make for a better experience in any way at all and don't see the point of it. We want change but it has to make the experience better for the majority of players that are affected, and so far it doesn't.


Messages In This Thread
[MERGED PR] Scaling pipe leakage - by github_bot - 05-11-2022, 09:50 PM
RE: [PR] Scaling pipe leakage - by Kotlol - 05-12-2022, 04:02 AM
RE: [PR] Scaling pipe leakage - by Ikea - 05-12-2022, 04:50 AM
RE: [PR] Scaling pipe leakage - by Azrun - 05-12-2022, 07:45 AM
RE: [PR] Scaling pipe leakage - by Ikea - 05-12-2022, 01:49 PM
RE: [PR] Scaling pipe leakage - by nefarious6th - 05-12-2022, 02:55 PM
RE: [PR] Scaling pipe leakage - by Splints - 05-15-2022, 08:58 AM
RE: [PR] Scaling pipe leakage - by Confuseddp - 05-17-2022, 06:04 PM
RE: [PR] Scaling pipe leakage - by Jakson - 05-17-2022, 06:59 AM
RE: [PR] Scaling pipe leakage - by Kotlol - 05-17-2022, 07:53 AM
RE: [MERGED PR] Scaling pipe leakage - by Cal - 05-22-2022, 04:35 AM
RE: [MERGED PR] Scaling pipe leakage - by Jazzy Blues - 05-22-2022, 06:37 AM
RE: [MERGED PR] Scaling pipe leakage - by Cheffie - 05-22-2022, 05:15 AM
RE: [MERGED PR] Scaling pipe leakage - by Piksqu - 05-22-2022, 10:50 AM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-22-2022, 11:55 AM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-22-2022, 03:58 PM
RE: [MERGED PR] Scaling pipe leakage - by Cheffie - 05-23-2022, 08:09 AM
RE: [MERGED PR] Scaling pipe leakage - by SenExus - 05-23-2022, 09:55 AM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-23-2022, 10:30 AM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-23-2022, 12:07 PM
RE: [MERGED PR] Scaling pipe leakage - by SenExus - 05-24-2022, 12:05 PM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-24-2022, 03:29 AM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-24-2022, 04:38 AM
RE: [MERGED PR] Scaling pipe leakage - by Cheffie - 05-24-2022, 02:41 PM
RE: [MERGED PR] Scaling pipe leakage - by SenExus - 05-25-2022, 10:20 AM
RE: [MERGED PR] Scaling pipe leakage - by Azrun - 05-26-2022, 10:59 AM
RE: [MERGED PR] Scaling pipe leakage - by Cheffie - 05-26-2022, 01:08 PM
RE: [MERGED PR] Scaling pipe leakage - by Kotlol - 05-27-2022, 03:48 AM
RE: [MERGED PR] Scaling pipe leakage - by Azrun - 05-30-2022, 12:30 PM
RE: [MERGED PR] Scaling pipe leakage - by Cheffie - 05-31-2022, 04:15 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)