Riderfighters' Trunk o' Junk - Printable Version +- Goonstation Forums (https://forum.ss13.co) +-- Forum: Discussion (https://forum.ss13.co/forumdisplay.php?fid=6) +--- Forum: Ideas & Suggestions (https://forum.ss13.co/forumdisplay.php?fid=8) +---- Forum: Sprites (https://forum.ss13.co/forumdisplay.php?fid=13) +---- Thread: Riderfighters' Trunk o' Junk (/showthread.php?tid=3929) |
Riderfighters' Trunk o' Junk - Riderfighter - 01-04-2015 These are plasma cuffs V.1 these use Power Towers or Port-a-Power Station To Work! They will stun the wearer every minute or so which would stop the wearer from taking them off. These are state of the art plasma cuffs that don't shock the wearer but slow the break out process, but like the Plasma Cuffs V.1 they are powered by Port-a-Power Station. Lastly, the inactive Port-a-Power Station which needs to be wrenched over a power wire to work. These are the images for the powered Port-a-Power Station --- This is an active power station it is like a Tesla that powers the cuffs by shocking the air around it in low volts, Emagging this tower will cause it to over charge and send shocks out like over charged APC's This is Port-a-Power Station V.2 Not done Yet! Re: Riderfighters' Trunk o' Junk - Frank_Stein - 01-04-2015 There's that thread where people were trying to come up with good reasons to increase the engine's output beyond telescience. These might be a good thing to put there. Re: Riderfighters' Trunk o' Junk - Riderfighter - 01-04-2015 Frank_Stein Wrote:There's that thread where people were trying to come up with good reasons to increase the engine's output beyond telescience. These might be a good thing to put there.I might do that thanks for the idea! |