Recycler stuck believing it's in communal mode - Printable Version +- Goonstation Forums (https://forum.ss13.co) +-- Forum: Discussion (https://forum.ss13.co/forumdisplay.php?fid=6) +--- Forum: Bug Reports (https://forum.ss13.co/forumdisplay.php?fid=9) +---- Forum: Resolved (https://forum.ss13.co/forumdisplay.php?fid=16) +---- Thread: Recycler stuck believing it's in communal mode (/showthread.php?tid=2543) |
Recycler stuck believing it's in communal mode - rulib - 05-19-2014 I scanned the recycling unit from the mechanic lab and built a new one on Hemera. When I added materials to it it functioned normally, but when I tried to eject them it claimed to be in communal mode despite claiming also that communal mode was unavailable, making it so that I could not get my materials out to use. Sequence of events I built the recycler I built a manufacturer next to it I recycled a bunch of materials I click-dragged the recycler output to the manufacturer (this may be relevant?) I tried to eject the materials, thinking they'd go over to the manufacturer hopefully - this did not work. Re: Recycler stuck believing it's in communal mode - Kovirii - 05-20-2014 Also here http://forum.ss13.co/viewtopic.php?f=7&t=2837 I've noted that after some faffing around, the recycler can get stuck so that you can't eject anything, no matter the settings. Re: Recycler stuck believing it's in communal mode - Crumplehat - 05-20-2014 Kovirii Wrote:Also here http://forum.ss13.co/viewtopic.php?f=7&t=2837 Have you tried dragging from the recycler to the floor? Sometimes I've found that if I drag-click to the recycler by accident, it thinks I want to output stuff to itself, so it doesn't eject anything. If you click drag to the floor, it'll output to the floor like it should. |